How to Use Leverage and Work Smarter not Harder

quick video showing the advantage of using leverage and working smarter not harder. Anytime you can use a tool other than your body, do it! Your older self will thank you!

Best hearing protection!! Check out ISOtunes
bit.ly/2PoXSBw Use my code to save! RRB10

KOMMENTARE

  • RR Buildings
    RR BuildingsVor Monat

    PLEASE READ!! clearly there is so much confusion based on these comments. Let me clear a couple things up. First and Foremost...my safety is important...I do what I know and feel comfortable with. Now to address the common comments 1.) I am building a structure with an 80' truss. If you have never done that, understand the truss is just basically hanging there at the moment and the shear weight of it makes it want to fall over. I am not adding "stress: to my nail once constructed. I am pulling the truss to plumb so it can be secured properly. 2:). I am never going to hurt this "square" or triangle as some want to call it. I promise you, this is not hard on it. 3:). I am pounding in a 60d hardened ringshank. While there are a couple nail guns on the market that can shoot this nail (I own one) it is impractical and even more unsafe to be up on this structure with an air hose. They don't make a battery powered nailgun for this. With that being said, anyone that wants to send a video to me of them pounding one of these nails in with three hits as so many have claimed, I will send them something as a congratulations for being such an awesome dude...for me, I can't. 4'). FINALLY, I am nailing exactly where I want to nail. It is a 2-ply truss. I can't nail in the center or the nail will have no holding power. I am nailing in the center of the truss closest to me....the one I pointed at originally. I hope this helps some of you. I don't normally feel the need to correct so many of you or answer with a response, but I hope everyone understands, this is not going to fall over due to too much stress now, my square isn't broken, the nail is not going to break (the reason we use them for this application), and while I'll never wear a hardness in my scissor lift under these circumstances, I do agree, standing on a rail is not "safe" but how it's my best option for this situation. Most just climb the truss, I try to work out of the lift for the added safety. Thank you for coming to my TED talk Kyle

  • 19jc80

    19jc80

    Vor 3 Stunden

    People butthurt about him standing on the rail of the lift. I've used ladders in a lift to get higher than the lift would reach. The world isn't built by pansies, sorry. It is built by people who take calculated risks.

  • TheRealThizzKhalifa

    TheRealThizzKhalifa

    Vor 17 Stunden

    People that dont work construction shouldn't have opinions

  • kro jones

    kro jones

    Vor 2 Tage

    And wear a safety harness

  • Poop

    Poop

    Vor 2 Tage

    Thank you OP. Didn't realize this was a two-ply truss. Now it makes sense.

  • The Niggler

    The Niggler

    Vor 4 Tage

    That safety nonsense is unnecessary if you know what you're doing. But you swing a hammer like a pregnant woman.

  • Keith Tawanpiy
    Keith TawanpiyVor 9 Minuten

    Lol I think your way is more work

  • Travis Hooper
    Travis HooperVor 47 Minuten

    Your off 3/4" bro

  • Shafie Abdullah
    Shafie AbdullahVor Stunde

    Safety first

  • Ryan Lascala
    Ryan LascalaVor Stunde

    Way to much work. You'd get fired on a real job site for taking too long bro! And where is your hard hat, talking about all this safety!

  • Charles Chancellor
    Charles ChancellorVor Stunde

    That was way overly complicated

  • Sai Prayastha
    Sai PrayasthaVor 3 Stunden

    Let khaby see this video instead of using that device you can come this side and lean on the wood and use your thighs to push it and hands to nail down

  • Fred Alaniz
    Fred AlanizVor 4 Stunden

    That’s a no no on the scissor lift

  • Heyhey Saturday
    Heyhey SaturdayVor 5 Stunden

    I still wouldn't do that what happens if you slipped , bad idea

  • Km Andrews_
    Km Andrews_Vor 6 Stunden

    MAYBE YOU NEED A PROFESSIONAL CARPENTER AND PROFESSIONAL TOOLS

  • LODIE CHODIE
    LODIE CHODIEVor 7 Stunden

    Loser hammer....

  • Sean Faber
    Sean FaberVor 8 Stunden

    TBH it looked a lot less awkward and made more sense to do it the way you were trying to avoid.

  • dd3831
    dd3831Vor 8 Stunden

    Until you drop the square lol

  • Ivan Boyd
    Ivan BoydVor 8 Stunden

    Buddy you're a hack. Who tf uses a layout tool for leverage 😂😂

  • Thien Tam Hoang
    Thien Tam HoangVor 9 Stunden

    Im using plastic ruler 🥲

  • Jason Glaubke
    Jason GlaubkeVor 11 Stunden

    Now do I need a 200$ hammer for this to work?

  • Arbitrage Ninja
    Arbitrage NinjaVor 11 Stunden

    He didnt make it to the line 🥺🥺🥺

  • hairlesheep
    hairlesheepVor 12 Stunden

    Why are the majority of houses in America built like sheds? I have visited two 3rd world countries and seen backyard garages/sheds built like this.

  • Hardline Manufacturing
    Hardline ManufacturingVor 13 Stunden

    I love all your stuff, but using a square as pry bar is not ok.

  • Kyle B
    Kyle BVor 13 Stunden

    It also helps if u have a 300$ titanium square.

  • Mitchell Arkinstall
    Mitchell ArkinstallVor 14 Stunden

    Shouldn’t the truss be in line anyway?

  • Bob TheBlob
    Bob TheBlobVor 16 Stunden

    Now he can only make 80 degree angles

  • bang ali
    bang aliVor 16 Stunden

    Teman anda yang merekam fungsinya buat apa?

  • Nick Keene
    Nick KeeneVor 19 Stunden

    “I want this line at the center” *proceeds to not center it at all*

  • romeocharlie1

    romeocharlie1

    Vor 9 Stunden

    We're all thinking the same thing. But it's 2 ply. So it's 2 pieces put together. He got the middle of the piece closest to him (which he pointed at the start)

  • Robert Fain
    Robert FainVor 21 Stunde

    So we not gonna talk about how he hammers with both arms or what

  • jotrey fegurgur
    jotrey fegurgurVor 21 Stunde

    No harness not very smart of you

  • REDNECK
    REDNECKVor 22 Stunden

    Nicely done. Thanks

  • paul se
    paul seVor 22 Stunden

    Good trick, I'm just curious about who taught u how to use a scissor lift.

  • GP P
    GP PVor 23 Stunden

    Who's this a trick for?? Lol. Every framer thinks you're a joke!.... No amature, do it your selfer, is framing a house! Get lost

  • Miguel Acosta
    Miguel AcostaVor Tag

    Or just have a good line instead of building a crooked house

  • Ian Fenner
    Ian FennerVor Tag

    Why is it so far off to begin with? I know wood is warped sometimes but was this just mis measured or what?

  • Clinton Sherry
    Clinton SherryVor Tag

    Who uses a hammer get a nail gun if this is work smarter not harder duh!

  • Matt Lord
    Matt LordVor Tag

    The nicest speed square I have ever seen that would go in the gun safe and never get used.

  • Polat Alemdar
    Polat AlemdarVor Tag

    Why do they use nails instead of screws can someone please explain, cause I thought nails squik over time

  • Gary Suarez
    Gary SuarezVor Tag

    Brilliance in simplicity.

  • Seven_Deadly_Sins_Archillies
    Seven_Deadly_Sins_ArchilliesVor Tag

    Damn you think that far off something may be wrong ?

  • toordog
    toordogVor Tag

    You can tell he never gets up there based on his swing... lol

  • Leonardo Reis
    Leonardo ReisVor Tag

    So the square is no longer square and you missed the line

  • TUAN ĐO
    TUAN ĐOVor Tag

    CÁI THƯỚC GÓC TỐT THẬT. !!

  • JP Mossin
    JP MossinVor Tag

    Idc personally but shouldnt you have a harness

  • 지붕이
    지붕이Vor Tag

    와우~ 반갑습니다. !!!!! 영상 너무 재밌어요....!!!! 멋져요 👍 😍 💕 😎

  • Birros Polanski
    Birros PolanskiVor Tag

    Next he'll show us how to use a scissor lift safely 🤣

  • Mathieu Patterson official
    Mathieu Patterson officialVor Tag

    Everyone: *talking about building shit* Me: *horrified of how high he his off the ground*

  • aaron urban
    aaron urbanVor Tag

    Geez get a real hammer.

  • Cereal Killa
    Cereal KillaVor Tag

    Are you serious here? Do you not own a framing gun? Also, 7" isn't much leverage. Screw a 6' 2x4 into the side of that truss and put it where you want. 😉

  • estevon hernandez
    estevon hernandezVor Tag

    He’s about 3/8 of center

  • Robert Garcia Ortega Dino Senior
    Robert Garcia Ortega Dino SeniorVor 2 Tage

    Now that's a labor savior, 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

  • Miguel Quazar
    Miguel QuazarVor 2 Tage

    Are those the Home Depot specials? The discounted 2 x Bows?

  • D A
    D AVor 2 Tage

    Still looked like a good inch from the line 🤣

  • James Griggs
    James GriggsVor 2 Tage

    Just was wondering why your boards and measurements was offf mark?

  • Francisco Arenas
    Francisco ArenasVor 2 Tage

    That's to much work Thiers an easyer way

  • Kabuang's Channel
    Kabuang's ChannelVor 2 Tage

    We dont have that kind of triangle material here in the philippines. wen u use it like that it breaks. hahahhaha

  • TheDkb427
    TheDkb427Vor 2 Tage

    You can also use another hammer or nail puller. God I need a life besides working lol

  • CeresEclipse
    CeresEclipseVor 2 Tage

    How do Amish people do it?

  • Mr Mellow Crafty
    Mr Mellow CraftyVor 2 Tage

    You know it's illegal to step on the side railings. On that their JLG boom lift your using. Be careful posting this. Also when outside you should be using a harness that's tied off to your scissor lift. In Case you fall over the other side of that their beam you stuck your knee on. Everybody says that will never happen to me. It happens alot. Be safe out there.

  • Dave Kelly
    Dave KellyVor 2 Tage

    Your square will end up (not square) if you keep using it for that 🤣

  • Nekro Rotinvag
    Nekro RotinvagVor 2 Tage

    lol, that is no trick

  • Jaden Deckard
    Jaden DeckardVor 2 Tage

    Me watching this and thinking about how OSHA would react😂

  • Dustin Clark
    Dustin ClarkVor 2 Tage

    Thanks now I have a speed not square.

  • RebelRedShirt _
    RebelRedShirt _Vor 2 Tage

    Still didnt get it to the line

  • Steven Harris
    Steven HarrisVor 2 Tage

    My man up there with no harness, no safety line, and pretty much breaking every safety standard out there.

  • Siouxperman

    Siouxperman

    Vor Tag

    At least he has safety glasses on tho, sorta. Haha

  • justinas Pipinis
    justinas PipinisVor 2 Tage

    Standing on the handrail that's the new trick......

  • Back Down On The Boat
    Back Down On The BoatVor 2 Tage

    Came to the comments for all the armchair engineers….

  • Justin S
    Justin SVor 2 Tage

    OSHA wouldnt approve where is your tieoff

  • jimsyhammond
    jimsyhammondVor 2 Tage

    I thought roof trusses where prebuilt in a factory and delivered to site.....

  • Crow Valclamore
    Crow ValclamoreVor 2 Tage

    Who the hell uses a hammer & nails on a job site now a days, anyways? Just pull your weight back in the center board & use a passload, you can get 3 nails in the time it take to hammer half of one.

  • COVID 165
    COVID 165Vor 2 Tage

    I also can’t use a hammer if my other hand is busy pulling The other board. Now Instead of pulling I just have to hammer in another nail, put another tool in my hand and push down to line up my boards on a scissor lift, oh then remove the nail used to hold the angle 📐

  • J PumpkinKing
    J PumpkinKingVor 2 Tage

    I dunno. Maybe if the measurements weren’t off, he would have to do that. 🤷🏼‍♂️

  • Chris Burns

    Chris Burns

    Vor Tag

    Framed a lot of roofs with trusses that big have you? Sometimes stuff needs to be pushed into place when building, he was lining his measurements up.

  • Ethan Durham
    Ethan DurhamVor 2 Tage

    No off but why the fuck are you using nails use screws my guy

  • Roam Washington
    Roam WashingtonVor 2 Tage

    Legit

  • Dylan Tellez
    Dylan TellezVor 2 Tage

    This is really smart but you should really be safer. You only get one shot at life. No job in the world is worth getting hurt over.

  • Garrett Patrick
    Garrett PatrickVor 2 Tage

    Or just do it right in the first place and don’t cut corners. For instance, maybe not stand on the handrails of a scissor lift? I would rather not Jeopardize my safety over trying to get and extra couple of feet higher. You could have rented a scissor lift for the correct height needed. Don’t learn tricks because tricks are in turn shortcuts. Just saying.

  • Ryan Hyde
    Ryan HydeVor 2 Tage

    Hello my fellow man lift side rail stander!

  • Kevin Farabaraharabara
    Kevin FarabaraharabaraVor 3 Tage

    I'm more impressed he didn't miss a single hammer stroke.

  • Adilson Marques Souza
    Adilson Marques SouzaVor 3 Tage

    CADE OS E.P.I.S

  • Pokenigggaa
    PokenigggaaVor 3 Tage

    Thats actually helpful asf

  • wrenchlsx
    wrenchlsxVor 3 Tage

    Standing on the rail, no safety chain and no boots damn I need to work residential 😄🤙sweet trick none the less

  • Keaka Kahananui
    Keaka KahananuiVor 3 Tage

    Does osha approve rail standing?

  • Adrian Perez
    Adrian PerezVor 3 Tage

    I love your work one cuestion how much in massachusett for a garage size 30 by 40 something like this for my house 🏠

  • MaxxYield
    MaxxYieldVor 3 Tage

    Good way to ruin your speed square...

  • Trentley Newman
    Trentley NewmanVor 3 Tage

    How about a really big wood screws and drill

  • YM.DR. KiN TV
    YM.DR. KiN TVVor 3 Tage

    Hope that building still standing lol 😂 wit that I can’t trust it

  • Floyd Flemm
    Floyd FlemmVor 3 Tage

    Digga dasn Präzisions Werkzeug. Brennt dir der Helm oder was?!

  • evi1 dav3
    evi1 dav3Vor 3 Tage

    Cool trick. Learned something new to do with a speedsquare. Can't say I recommend climbing on the railing of a man lift though. I've done it though, gotta get it done sometimes. Stay safe out there.

  • Johnny
    JohnnyVor 3 Tage

    That's cool and all but no gloves no hard hat no safety harness man if you would fall that video would not even matter

  • F S
    F SVor 3 Tage

    Is it still sqare after this ?

  • Chezzelby
    ChezzelbyVor 3 Tage

    Awesome tip mate. I almost can’t wait for my nailgun to shiz itself to try this

  • Kelly Judge
    Kelly JudgeVor 3 Tage

    Fall arrest 😥

  • Airbag888
    Airbag888Vor 3 Tage

    How about make the person recording help out

  • Goat Sinker
    Goat SinkerVor 3 Tage

    Glad i live in a country where buildings are built with concrete and blocks. That stuff you're building would not pass any inspection.

  • Chris Burns

    Chris Burns

    Vor Tag

    Sounds like you live in an area with a lot of ugly buildings, like soviet union style. Wood houses have so much more charm, and work just fine.

  • dark vigilante
    dark vigilanteVor 4 Tage

    That is not a square by the way.

  • rami bouker
    rami boukerVor 4 Tage

    Take your square, am i crazy or is that thing a triangle

  • Omrie Prue
    Omrie PrueVor 4 Tage

    Then he falls after the video that did not actually happen but idk why I thought of that lol 😂

  • Donald Shimkus
    Donald ShimkusVor 4 Tage

    They make a bigger square that's better suited for that job, more leverage ya know.

  • William Powers
    William PowersVor 4 Tage

    Thats next level

  • jmanzx1
    jmanzx1Vor 4 Tage

    When you get a physics lesson and learn about the fulcrum basic machine

  • Carlos Cruz
    Carlos CruzVor 4 Tage

    Why build houses to cheaply in America? It’s like a giant toothpick house. Why they do this way?

  • Cameron Nalley

    Cameron Nalley

    Vor 4 Tage

    Because it works just fine 🤔

  • Peter Gniech
    Peter GniechVor 4 Tage

    That's a good tip.But at the same time you are on a lift with no PPE and also standing on the rail of the skyjacklift.Not cool my friend.

  • Chris Burns

    Chris Burns

    Vor Tag

    I remember being shocked when I first started residential. Totally different world than commercial sites.

  • Ali Sigdeniz
    Ali SigdenizVor 5 Tage

    Why’s the line out on the first place?

  • Uncle Putin
    Uncle PutinVor 5 Tage

    Why would it be unsafe to be up there with an air hose? Nail guns aren't heavy and as long as you approach it from the right angle you would have no issue with the line. We did stuff like this all the time and didn't even have a lift, just ladders.

Nächster